Shindengen Cdi Wiring Diagram

There is a usually a wire connection for the CDI Ignition Power on the stator, but it generally is not used as the power is supplied by the ignition key switch and battery; MORE: 5 Pin CDI Wiring Diagram. Connecting The CDI Box. The easiest way to connect a new CDI Box is to purchase a kit that provides both the CDI Box and a main wiring harness.. CDI (Capacitor Discharge Igniter) The capacitor is charged via a direct connection with voltage from the ACG or the battery, or the voltage is increased to charge the capacitor. The charged electrical load is discharged all at once, generating a high voltage on the secondary side of the coil, initiating ignition and combustion. Features

The stock CDI box has a built-in rev limiter and I can find no bypass for it. Sometimes there will be one wire that loops out and back in, and that is the wire that controls the top RPM. On those boxes, you can cut the wire to make it work. 30-35mph should be the correct top speed on a restricted model by the way, so yours is running properly.. the site is shindengen.com and there is a customer support phone number listed for different countries. I found it was sold in Mexico, Austraiia and New Zealand. And wait- a search just found the site with manual for $12 on CD which is invaluable since no shop in the USA will have this info.