Ensure that the FLIR ONE app is installed on your phone and the FLIR One Pro camera is properly connected to your phone. 2. Open the FLIR ONE app on your phone. 3. In the app, select the "Thermal" mode or switch to the thermal imaging view. 4. Aim the FLIR One Pro camera at the object or scene you want to capture. 5.. The indicator will flash green when the FLIR ONE camera is ready. Page 8: Camera Parts Camera parts 5.1 FLIR ONE PRO and FLIR ONE PRO LT 5.1.1 View from the front 1. Visual camera. 2. Thermal camera. 3. Phone connect. 4. Height control for the OneFit connector. 5.1.2 View from the bottom 1. On/off switch and Power indicator. Page 9: Flir One
To start using your FLIR ONE Pro, Pro LT (Discontinued), or Gen3 camera, follow these four simple steps: Charge the camera for 40-60 min. Install the FLIR ONE app on your phone/tablet from the App Store (iOS) or the Play Store (Android).; Turn on your FLIR ONE by pressing the power button and wait until the steady orange light changes to a blinking green light.. The FLIR ONE allows you to see the world in a whole new way, with a unique blend of thermal and visible imaging. This user guide provides brief information on how to use the FLIR ONE. Additional information is available directly from the FLIR ONE app in the Settings Menu. CHARGING THE FLIR ONE Plug the Lightning USB end of the power cable into.