Calibrating your board Using the SMART Interactive Whiteboard Part 2

If the system detects a problem with calibration, a warning bubble may also appear recommending that you perform a calibration. To calibrate your interactive whiteboard The first time you connect the interactive whiteboard, press the Please calibrate the SMART Board interactive whiteboard pop-up bubble that appears in the bottom right corner of.. In some cases your SMART Board E70 and 4000 series interactive flat panel may need to be configured or calibrated, this is done when touch is inaccurate or not working. This article has instructions on the configuration and calibration of your interactive flat panel.

Continue pressing targets until the second calibration screen and a grid appears. An example appears briefly to demonstrate how to draw across the screen to calibrate the interactive surface. Use a pen to draw a spiral horizontally across the grid. As you draw, the ink is blue. As you complete each square, the square becomes green.. Calibrate your Smartboard. You'll need to calibrate your Smartboard before using it to be sure it's aligned properly. To calibrate your Smartboard, press the keyboard and right mouse buttons at the bottom of the board at the same time. Then, pick up one of the Smartboard pens and tap it against the target that appears onscreen.